No Decode Delegates… and Conflicts

It’s not often that we run into unusual conflicts rooted in hard to find places, but those few times that they are encountered–no matter how rare–can be infuriating. I was recently bitten by this one, demonstrated by a particularly bizarre error when attempting to load an image (any type) into the php-imagick ImageMagick extension:

$ php -a 
Interactive shell
 
php > $c = new Imagick('kmix.png');
PHP Warning:  Uncaught exception 'ImagickException' with message 'no decode delegate for this image format `kmix.png' @ error/constitute.c/ReadImage/552' in php shell code:1
Stack trace:
#0 php shell code(1): Imagick->__construct('kmix.png')
#1 {main}
  thrown in php shell code on line 1

Yet, paradoxically, convert -list delegate, convert -list configure, and convert -list format all hinted that PNG and JPEG support were both installed. Worse, searching for “php imagick no decode delegate” resulted in few useful hits, and of those hits most were indicative of configuration problems, custom builds missing the appropriate libraries, and other dilemmas punctuated by the usual PEBKAC retort (though such accusations are sometimes accurate).

Nothing worked, of course. Swapping out to older versions of ImageMagick failed, and I had no intention of trying an earlier version of PHP or php-imagick. At this point, I had no expectations to find the solution online, and the only thing I surmised might work would be to attempt duplicating the problem on another machine. So, I set about installing ImageMagick (v6.8.5-10) and php-imagick (v3.0.1 plus PHP 5.4 patches and v3.1.0RC2) with the current-latest version of PHP available in the Arch repositories (v5.4.16) and quickly discovered that it worked quite well. This was a positive sign: Nothing about the latest builds indicated there was a problem, so it was plausible that the problem lurked elsewhere.

And it did.

I soon noted that the virtual machine I booted was lacking php-gmagick and GraphicsMagick both, though ImageMagick and GraphicsMagick worked quite well on my machine together. Thus, I speculated that perhaps php-gmagick was conflicting somehow with php-imagick. I commented out the gmagick extension, re-ran some unit tests, and presto! php-imagick was now working perfectly fine. Uncommenting the gmagick extension resulted in a return of the problem, and so I was (and am) convinced that the problem is a conflict between both extensions. Possibly, this is due to the definition of symbols or other such nonsense in gmagick that imagick requires (and is very upset when it discovers they already exist).

Is it possible to get them to play nicely together? Maybe.

On my machine, PHP extensions and their options are loaded from /etc/php/conf.d. These files are, apparently, loaded alphabetically in order, and since “G” comes before “I,” you might imagine (correctly) then that gmagick gets loaded before imagick which is where the magic stops (my apologies; that pun was awful). By renaming them to something creative, such as “10-imagick.ini” and “20-gmagick.ini”, it is then possible to force imagick to load before gmagick, and they’ll both work cooperatively near as I can tell. Perhaps gmagick defines–but doesn’t use–some interpreter symbols that imagick actually needs, but if they’re already defined gmagick doesn’t care? I don’t know. I can only speculate, because I know next to nothing about PHP internals. (Perhaps now might be a good time to start.)

Although renaming or otherwise moving the extension configs into an order that would suggest imagick.so gets loaded first seems like an adequate solution, the problem is that these two extensions most assuredly do conflict. Between PHP versions, you can’t be guaranteed that the loader mechanism for extensions will remain static and thus the possibility exists that renaming the *.ini files is only an ephemeral solution. Moreover, it’s also possibly an accident that it works on my machine; perhaps the inode order is such that imagick.so now gets loaded before gmagick.so simply due to luck. Or maybe I’ve now reduced it to a race condition? The point is that you shouldn’t rely on this in production. Instead, you should select between GraphicsMagick or ImageMagick, picking the one that best fits your use case. If you’re using a wrapper library to select the best backend available, force it to load a specific one in production mode. Obviously such concerns aren’t much of a bother on a development box, but I’d nevertheless recommend a healthy dose of caution.

If you’ve encountered this issue yourself but never found a reasonable solution, let me know. If this article helps in any measurable way, I’d be happy to hear from you. It’s been a frustrating few hours for me, and I hope that this will at least alleviate you of wasting further time on something that is poorly documented but easy to fix.

***

2 Responses to “No Decode Delegates… and Conflicts”

  • Chema writes:

    I know this post is old, but THANK YOU!, I need to migrate from gmagick to imagick and this problem was driving me mad, I couldn’t find a solution anywhere (ofc I had the correct version, and I had the correct path, and identify/convert worked…)
    Again, thank you very much!

  • Benjamin writes:

    You’re welcome.

    I hadn’t checked my blog in a few days, so sorry about the delay on approving your comment.

    Cheers.

Leave a comment

Valid tags: <a href="" title=""> <abbr title=""> <acronym title=""> <b> <blockquote cite=""> <cite> <code> <del datetime=""> <em> <i> <q cite=""> <s> <strike> <strong>